Scan Any Distribution Board or Test Instrument
Turn a photo of a consumer unit into a structured circuit schedule instantly.
Board Vision lets you capture a full distribution board, analyse its layout, and generate a clean, organised circuit schedule in seconds. No manual entry. No retyping. Just accurate results, ready for review.
How Board Vision works
Take a photo of the consumer unit and crop it to the breakers and main switch. Board Vision checks the photo is sharp, well lit and big enough, reads every device, rating and label, numbers the circuits from the main switch and pre-fills each circuit on your certificate.
Three ways to scan
Scan Whole DB Board
One photo of the board: every way, device and rating, including 3-phase TP&N boards.
Single Circuit
Add or check one circuit at a time without rescanning the board.
Hand Written Or Printed Schedule
Bring in the schedule from an old paper or PDF certificate. Scan Another Sheet when it runs over more than one page.
- Reads MCBs, RCBOs, AFDDs, RCDs, SPDs, fuses and main switches, with their ratings
- 3-phase TP&N boards with L1, L2 and L3 worked out automatically
- Scan a PDF certificate and its circuit data comes straight in
- Warns you if the photo is blurry, too dark or has glare, or does not show a board, so you can retake it
Photograph
Frame the board or the schedule, crop to what matters and tap Crop & Scan.
Review
Every circuit, device, rating and phase on the full screen Review Scan. Change anything before you import.
Import
The circuit schedule fills in on your certificate, with L1, L2 and L3 printed where they apply.
Test Vision: point the camera at the tester and the reading lands in the right box
Photograph your multifunction tester’s display. Test Vision recognises the test you are doing, reads the value and fills your certificate. Works with any test instrument: no cables, no pairing, no manufacturer software.
- Camera buttons on Continuity, Insulation resistance, Zs and RCD results
- Scan one result after another, then Add All Results to the circuit in one tap
- A confirmation screen shows every value, how confident the reading is (high, medium or low) and the box it will fill, before anything is added
See Board Vision working
Watch Board Vision scan a real board
See a consumer unit go from one photo to a filled circuit schedule in iCertifi.
Board Vision in under a minute
The short version: one photo of the consumer unit, the circuits come in.
Built for Real Electrical Work
- Works with any brand of test instrument
- Supports EICR, EIC and Minor Works workflows
- Designed for UK electrical installations
- Reduces admin time and transcription errors
You stay in control: every result is reviewed before being added to your certificate.
Built for Electricians
Board Vision is built for professional electricians carrying out EICRs, electrical installation certificates, Minor Works and more.
It works on site, reduces admin time, and integrates directly into your certification workflow.
Board Vision FAQs
Is Board Vision an electrical testing app?
Board Vision is a feature within the iCertifi app. It helps electricians capture test results, analyse distribution boards, and generate structured data as part of the certification process.
Does Board Vision work with any test instrument?
Yes. Board Vision works with any brand of test instrument by reading test results directly from the display and linking them to the correct circuit inside iCertifi.
The full range of BS 7671 electrical certificates. EIC, EICR and Minor Works, with the calculators built in: Zs verification, R1+R2, PFC and cable sizing.
