Latest releases

Fixes an issue affecting team accounts.

WHAT'S NEW IN 8.3

A FULL DESIGN REFRESH
• Every certificate form rebuilt with a modern grouped-card design — clearer sections, larger touch targets, completion ticks as you work
• Set All Satisfactory / Set All N/A on inspection schedules
• New Certificate picker — every document listed by the type of work, with search
• Recent shortcuts on the Home screen: start another of your last three certificate types with one tap
• Fill in your contractor details from your other iCertifi apps on the same device
• Redesigned About page

PDF IMPROVEMENTS
• Consistent footer and page numbers on every certificate page
• Corrected wording and standard references throughout (BS 5839-1:2025, BS 5266-1:2025)
• The Next Inspection recommendation now prints in full

Fixes and improvments

GasCert 2.0 — What's New

GAS CERT 2.0

Twenty new certificates, a rebuilt CP12, and a redesigned way to fill
everything in.

NEW CERTIFICATES — 26 in total, up from 6
• Gas domestic: CP9, CP26, Benchmark commissioning, domestic purge,
service checklist
• Gas commercial: CP17, CP16, CP15, CP42, CP43, CP44, CP3
• Oil (OFTEC): CD/10, CD/11, CD/12, CD/14, TI/133D tank risk assessment,
tank installation
• Water & heating: Legionella risk assessment, unvented G3, system cleanse

A REBUILT CP12
• Stays landscape, the way the paper record does, with the appliances as
columns in one table
• Now two pages instead of three

APPLIANCES
• Swipe to delete an appliance — previously you could add but never remove
• Deleting one keeps the numbered answers with the right appliance
• Duplicating a certificate now keeps every appliance's Make, Model and
Flue type, and prints them in the order you entered them

DATA ENTRY
• Every certificate rebuilt as grouped cards, with completion ticks
• iPad: a permanent checklist sidebar, so you can jump between sections
• Quick Preview shows the certificate as you fill it in

ALSO
• Five gas calculators, grouped by the job: at the meter, sizing the
installation, safety and compliance
• Boiler fault code lookup
• Redesigned subscription screen showing real prices for your country
• Certificate menu on every screen: save, send, duplicate, mark as sent

FIXES
• Fixed a crash when opening any of the calculators
• Fixed Quick Preview opening an empty sheet on iPad
• Fixed the Gas Warning Notice camera saving nothing and leaving you
stuck on the camera screen
• Fixed subscribers being refused access to their own saved certificates
• Removed the app sounds (the gas rate timer still beeps)

Bug fixes and improvements:
• Fixed: some certificates printed an incorrect "Originally issued under BS 7671:2018+A2:2022" line across the bottom of the page, overlapping the standard footer text. Certificates created before the Amendment 4 update, or duplicated from one, were affected. Your test results and the declaration were always correct — the error was in this one printed line only.
• To correct a certificate you've already issued: open it, tap Revise, then export it again. The corrected PDF keeps its original issue date.
• Client Hub now spots and merges duplicate clients automatically, and prevents new duplicates being created.

Other fixes

What's New in 1.8

A newly designed certificate
• The PAT certificate has been completely redesigned and now prints at true print quality
• A clear summary of tested, passed and failed appliances sits at the top of the front page
• The appliance register now fits over 40 appliances per page, ideal for large jobs
• Failed appliances print with their photo on a dedicated photo evidence page
• Asset Record exports use the new design too

Easier data entry
• Every screen has been rebuilt with grouped cards that are easier to read and quicker to fill in
• The Next button now tells you where it goes
• A redesigned certificate menu with clear sections and icons
• A new signing panel with smoother, more natural ink

New: Clients
• A new Clients tab on the Dashboard builds your client book automatically from the jobs already on your device
• See every job for a client, keep notes, and get reminders before their retests fall due
• Tap a reminder and the app takes you straight to that client

Works with our other apps
• Pick your test instrument straight from Verifi on the Contractor Details screen, no more typing serial numbers
• Connect Mint Books and completed certificates raise draft invoices automatically, priced per appliance if you choose

Accuracy: IET Code of Practice, 5th Edition
• Test limits updated to the 5th Edition, including Class II FE
• The printed label now shows the appliance's recorded result
• RCD testing can now be recorded
• Printing the retest date on labels is now a setting, off by default in line with the Code
• Calendar reminders now use the retest interval you record, not a fixed year

Fixes and reliability
• Appliance photos are no longer cropped and print at a proper size
• A failed AI scan now keeps the photo you took
• Duplicated certificates keep their appliance order
• Backup and Restore is more reliable
• Many stability and crash fixes throughout

Verifi now works with iCertifi. Your instrument list makes, models, serial numbers and calibration dates is now available inside iCertifi on the same device, so certificate test instrument boxes fill themselves with one tap. Keep your accuracy checks up to date in Verifi and iCertifi will warn you before you certify with an out-of-calibration instrument. Just open Verifi once after updating and you're connected.

Improves sign in

2.1
- Fix for crash in Saved Certificates

2.20
- Updates Fire extinguisher types and makes
- Add Litres of KG for extinguisher capacity
- Dark mode
- Optimised for macOS (requires M1 chip or above)
- Lots of improvements