PAT test labels tell anyone who picks up an appliance that it has been tested, when, and whether it passed. PAT Test Pro now prints them on a Brother label printer straight from your iPhone, iPad, Mac or Android phone, the moment you mark the appliance Pass or Fail. This guide covers what a PAT label should show, which Brother printers work, and how to set one up.
Label printing
Works with
Pass it. Print it. Stick it on.
Mark an appliance Pass or Fail and PAT Test Pro prints its label on your Brother label printer, straight from your phone. Next year, scan the label and the appliance is ready to retest.
Brother and the Brother logo are trademarks of Brother Industries, Ltd., used with permission. PAT Test Pro is an independent app. Label printing is part of a PAT Test Pro subscription.



What a PAT test label should show
The IET Code of Practice for In-service Inspection and Testing of Electrical Equipment (5th Edition) does not make labels compulsory. Where you do label, section 12.2 says the label should show the current safety status, passed or failed, and the date the test took place, in text so anyone can read it. A barcode or QR code can sit alongside, and a unique appliance ID helps tell similar items apart on the same site.
The retest date should not be marked on the label, except for equipment used in BS 7909 installations. The dutyholder sets the next test from a risk assessment and records it on the equipment register.
Summarised from the IET Code of Practice for In-service Inspection and Testing of Electrical Equipment, 5th Edition, section 12.2
That is how PAT Test Pro builds every label. The result is printed large, the test date is in plain text, and the retest date stays off unless you switch on Print retest date on label. The label always carries the result you recorded, so an untested or failed appliance can never leave with PASS on it.


On wider tape and labels the label adds who tested it and your company where there is room, with a QR code from 18 mm tape upwards. On 12 mm tape it prints the two things the Code asks for: the result and the date.
Which Brother label printers work
PAT Test Pro uses Brother's own printing software, so it works with Brother's P-touch, QL, TD and RJ printers that connect by Wi-Fi, Bluetooth or network cable. Some examples:
| Range | Labels | Examples and how they connect |
|---|---|---|
| P-touch | 12, 18, 24 and 36 mm tape | PT-E310BT, PT-E560BT, PT-E720BT, PT-E920BT by Bluetooth. PT-E550W, PT-P750W, PT-P900W, PT-P950NW by Wi-Fi. |
| QL | 29 mm and 62 mm rolls, 62 x 29 mm labels | QL-820NWB and QL-1110NWB by Wi-Fi or Bluetooth. QL-710W, QL-720NW, QL-810W by Wi-Fi. |
| TD | 57 mm rolls | TD-2125NWB, TD-2135NWB, TD-4455DNWB, TD-4555DNWB by Wi-Fi or Bluetooth. TD-2120N, TD-4420DN by network cable. |
| RJ mobile | 58 mm rolls | RJ-3230B, RJ-4230B by Bluetooth. RJ-3250WB, RJ-4250WB by Wi-Fi or Bluetooth. |
The full list, with how each model connects on your phone, is in the app under Settings, Brother label printer, Brother printers that work. On a Mac, PAT Test Pro prints by Wi-Fi. Only Brother label printers work: Dymo, Zebra and Niimbot printers cannot be used, though any AirPrint printer can still print the label, and you can always save it to your photos.
For labels that live on kettles, extension leads and workshop tools, Brother's laminated TZe tape is the one to load in a P-touch. Brother says it is tested for resistance to water, many chemicals and fading. The Code asks for labels that last until the next test, so it is worth the extra over paper labels.
Setting it up
Switch the printer onFor Wi-Fi, connect it to the same Wi-Fi as your phone using the printer's own menu or Brother's set-up guide. For Bluetooth, switch its Bluetooth on, then tap Pair a Bluetooth printer in PAT Test Pro.
Find itIn PAT Test Pro, go to Settings, Brother label printer and tap Find printers. The first time, tap Allow when asked to let PAT Test Pro find devices on your network. If it is not found, tap Enter the printer's address and type its IP address.
Check the sizePAT Test Pro asks the printer which tape or labels are loaded. If it cannot tell, tap the size that is in the printer, then tap Print a test label.
PrintOn any appliance's Label screen, tap Print label.

A label after every test, or the whole job at the end
- Print a label after each test. Switch it on in Settings, Brother label printer, and the label prints by itself when you mark an appliance Pass or Fail and go back to the list. Peel it off and stick it on before you pick up the next plug. A Manual Check never prints on its own, and a result that has not changed is not printed twice.
- Print all labels. At the end of the job, tap Print all labels under the appliance list. Print every label or choose which, and they come out one after another in the certificate's order.
Scan the label at the retest
Next year, tap Scan a label to retest under the appliance list and point the camera at the QR code. The appliance's details fill in, ready for its retest, so the register carries on from last year instead of starting again.
Questions
What should a PAT test label show?
Where you label, the IET Code of Practice (5th Edition) says the label should show whether the item passed or failed and the date of the test, in text anyone can read. A unique appliance ID helps tell similar items apart. The retest date should not go on the label, except for BS 7909 work; it goes on the equipment register instead.
Is a PAT test label a legal requirement?
No. There is no requirement to label equipment. Most dutyholders like a label because it shows at a glance that an item has been tested and when.
Which Brother label printers work with PAT Test Pro?
Brother P-touch tape printers, QL label printers, TD desktop printers and RJ mobile printers that connect by Wi-Fi, Bluetooth or network cable, for example the PT-E310BT, PT-E560BT, QL-820NWB, QL-1110NWB, TD-2125NWB and RJ-4250WB. The full list, with how each one connects, is in the app under Settings, Brother label printer, Brother printers that work.
Can I print PAT labels by Bluetooth?
Yes, on Brother printers that have Bluetooth. Some connect by Bluetooth only, some by Wi-Fi or Bluetooth; the app says which for each model. On a Mac, PAT Test Pro prints by Wi-Fi.
Do Dymo, Zebra or Niimbot printers work?
No. PAT Test Pro prints only to Brother label printers. You can still print a label on any AirPrint printer, or save it to your photos.
Can PAT Test Pro print a label after every test?
Yes. Switch on Print a label after each test and the label prints by itself when you mark an appliance Pass or Fail and go back to the list. A Manual Check never prints on its own, and a result that has not changed is not printed twice.
Brother label printing is part of a PAT Test Pro subscription. If a label does not print as it should, tell us your printer model through Contact Support on the app's About page. Brother and the Brother logo are trademarks of Brother Industries, Ltd., used with permission. PAT Test Pro is an independent app. Dymo, Zebra and Niimbot are trademarks of their owners.